T3 T1 Hot Rolled Tin Steel Plate Tin Coating Steel Coil Tin Electroplating 1050mm
Product Details
| Length: | 6000mm 5800mm 12000mm Or Customized | Size: | 0.14-0.55mm X 600-1050mm |
|---|---|---|---|
| Temper: | T1-T5, DR7-DR9 | Annealing: | BA Or CA |
| Price Term: | FOB, CIF, CFR, CNF, EXW | Usage: | Food Can, Industrial Can, General Line Packaging |
| Highlight |
tin electroplating 1050mm,hot rolled tin steel plate,tin steel plate tin coating |
||
Product Description
| Parameter | Specification |
|---|---|
| Thickness | 0.14 - 0.50mm |
| Width | 600 - 1050mm |
| Length | As per customer requirement |
| Steel Type | MR, SPCC |
| Annealing | BA (Batch Annealed), CA (Continuously Annealed) |
| Standard | EN10202, JIS G3303, ASTM A623/A624/A625/A626 |
| Temper | T1, T2, T2.5, T3, T3.5, T4, T5, DR7, DR8, DR8M, DR9, DR9M, DR10 |
| Coating for ETP |
Equally coated (1.1/1.1, 2.0/2.0, 2.8/2.8, 5.6/5.6, 8.4/8.4, 11.2/11.2) Differentially coated (2.0/1.1, 2.8/1.1, 5.6/1.1, 5.6/2.8, 8.4/2.8, 8.4/5.6, 11.2/2.8, 11.2/5.6, 11.2/8.4, 15.1/5.6) |
| Coating for TFS | Metal Chromium Layer: 50-150mg/m², Chromium Oxide Layer: 5-35 mg/m² |
| Delivery Time | 20-45 days |
| Supply Capacity | 8,000MT per month |
| Finish Type | Description | Material | Flow-Melted | Roughness (μm) |
|---|---|---|---|---|
| Bright | smooth | Tinplate | Yes | ≤ 0.35 |
| Fine stone | fine stone | Tinplate | Yes | 0.25 - 0.45 |
| Stone | stone | Tinplate | Yes | 0.35 - 0.60 |
| Silver | shot blast | Tinplate | Yes | ≥ 0.90 |
| Matt | shot blast | Tinplate | No | Various |
| Fine stone | fine stone | TFS/ECCS | - | 0.25 - 0.45 |
| Stone | stone | TFS/ECCS | - | 0.35 - 0.60 |
- Note 1: Double reduced product is only supplied as stone finish.
- Note 2: Sub-classified based on the surface finishing of the blackplate.
- Note 3: The appearance is governed by:
- the surface characteristics of the steel base which principally result from controlled preparation of the work rolls used during the final stages of temper rolling
- the mass of the coating applied
- whether the tin layer is flow-melted or unflow-melted
| Reduction Type | Temper Grade | Standards | Typical Application |
|---|---|---|---|
| Single Reduced (SR) | T-1 | T49 / TS230 | Drawn and ironed cans, nozzles, spouts, closures, mounting cup, oil filter |
| T-2 | T53 / TS245 | Ring and plugs, dome tops, closures, shallow drawn parts. Drawing can, body, end for large can | |
| T-2.5 | T54 / TS260 | Battery shells, small can ends and bodies | |
| T-3 | T57 / TS275 | Top and bottom of cans, can ends and bodies, large diameter closures, crown caps | |
| T-3.5 | T59 / TS290 | General use, pail, 18L, 4L | |
| T-4 | T61 / TH415 | Can bodies and ends, crown caps, closures. Body and end for small can | |
| T-5 | T65 / TH435 | Can ends and bodies requiring intensity. Body and end for small can | |
| Double Reduced (DR) | DR-7M | T71 / TH520 | DRD bodies, dome, Lug cap & 3 piece bodies |
| DR-8 | T72 / TH550 | DRD bodies, end, Lug cap & 3 piece bodies | |
| DR-8M | T73 / TH580 | DRD bodies, Lug cap & 3 piece bodies | |
| DR-9 | T75 / TH620 | DRD bodies, Lug cap & 3 piece bodies | |
| DR-9M | T76 / - | Thinner gauge body, end, DRD cans, caps | |
| DR-10 | - / - | DRD bodies, Lug cap & 3 piece bodies. Thinner gauge body, end, DRD cans, caps |
Product Highlights
T3 T1 Hot Rolled Tin Steel Plate Tin Coating Steel Coil Tin Electroplating 1050mm T3 T1 Hot Rolled Tin Plate Tin Coating Steel Coil Food Grade High Quality Product Specifications Parameter Specification Thickness 0.14 - 0.50mm Width 600 - 1050mm Length As per customer requirement Steel Type MR, SPCC ...
ASTM A240 Hot Rolled Flat Metal Coil Strip 304 316 309S HL 2D
ASTM A240 Hot Rolled Flat Metal Coil Strip 304 316 309S HL 2D Hot/Cold Rolled Stainless Steel Coil Strip 304 316 309S 310 310S 316L 321 ASTM A240 Product Specifications Product Name Stainless Steel Coil / Strip Specification Thickness: Hot Rolled (3.0-300mm), Cold Rolled (0.3-16mm). Customized sizes are accepted Width 500-2000mm Length 1000-6000mm Standard ASME, ASTM, EN, BS, GB, DIN, JIS, etc Material 304, 304L, 310S, 310, 309, 309S, 314, 316, 316L, 316Ti, 317, 317L, 321,
Medical Devices Cr Steel Sheet Plate DIN JIS 304 310 316 Ss Plate Price
Medical Devices Cr Steel Sheet Plate DIN JIS 304 310 316 Ss Plate Price Product Overview Hot Rolled Cold Rolled Stainless Steel Sheet Plate 304 316 310 Wholesale Products 300 series stainless steel refers to a family of austenitic stainless steels that contain chromium and nickel as primary alloying elements. The most common alloys in the 300 series are Type 304 and Type 316, which contain 18% chromium and 8-10% nickel. These steels are non-magnetic and offer excellent
Q235 A36 Mild Carbon Steel Sheet Plate Customized Thickness For Boiler
Q235 A36 Mild Hot Rolled Carbon Steel Sheet Plate Customized Thickness for Boiler Carbon content is low, the comprehensive performance is better, the strength, plasticity and welding performance is better match, the most widely used. Product Specification Product Name Steel Sheet Material A53 Gr.B, A36, ST52, ST35, ST42, ST45, X42, X46, X52, X60, X65, X70 Standard GB, ASTM, JIS, AISI, DIN Certificates ISO, RoHS, IBR, AISI, ASTM, GB, EN, DIN, JIS Thickness As requirement
Q235B Q355B Galvanized Steel Coil Hrc Hot Rolled SS400 S235JR S355JR For Construction
Q235B Q355B SS400 S235JR S355JR Carbon Steel Coil Hot Rolled for Construction Q235B Q355B SS400 S235JR S355JR Carbon Steel Coil Hot Rolled for Construction What is Q235 Carbon Steel? Q235 is a plain carbon structural steel widely used throughout China. Available in grades Q235A, Q235B, Q235C, and Q235D, this mild steel is utilized in production without heat treatment. The "Q" designates the yield point, while "235" indicates the yield strength. Applications of Q235 Carbon
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
